LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2021 >> CX-30 Turbo Premium >> Repair and Diagnosis >> External Pages >> Different car >> Section 1 (Automatic Transaxle System (Service Information) (EV6A-El, EV6AX-El)) >> Automatic Transaxle Removal/Installation (EV6AX-El) (Us) >> Removal >> Transaxle mounting bolt removal note

Transaxle mounting bolt removal note

WARNING: This page is about a different car, the 2020 Mazda CX-30. However, it is still accessible from the selected car via links, so may be relevant.
WARNING:
  • Remove the transaxle carefully, holding it steady. If the transaxle falls it could be damaged or cause injury.
  1. Adjust the SST and lean the engine toward the transaxle.
    G13556575Courtesy of MAZDA MOTORS CORP.
  2. Support the transaxle on a jack.
    G13558467Courtesy of MAZDA MOTORS CORP.
  3. Remove the transaxle mounting bolts (lower side).
  4. Remove the transaxle.
scientia non olet · About LEMON Manuals