LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2021 >> 6 Carbon Edition >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrumentation/Driver Info >> Beep Sound Adjustment >> Without Parking Sensor Switch >> Front parking sensor buzzer

Front parking sensor buzzer

  1. Disconnect the negative battery terminal. (See NEGATIVE BATTERY TERMINAL DISCONNECTION/CONNECTION .)
  2. Remove the grove compartment. (See GLOVE COMPARTMENT REMOVAL/INSTALLATION .)
  3. Connect the negative battery terminal. (See NEGATIVE BATTERY TERMINAL DISCONNECTION/CONNECTION .)
  4. Ground parking assist unit terminal V to the body using a jumper wire.
    G13725690Courtesy of MAZDA MOTORS CORP.
  5. Switch the ignition ON.
  6. Verify that the parking sensor buzzer sounds once.
  7. Disconnect the body ground.
  8. Ground parking assist unit terminal V to the body for approx. 0.5 s using a jumper wire to change the parking sensor buzzer volume.
    G13725691Courtesy of MAZDA MOTORS CORP.
  9. Disconnect the body ground and wait for approx. 10 s.
scientia non olet · About LEMON Manuals