LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2021 >> 3 Turbo, 4D Hatchback >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Intake-Air System And Turbocharger (VIN Y) >> Intake-Air System Removal/Installation >> Throttle body component Installation Note

Throttle body component Installation Note

  1. Remove the throttle body component.
  2. Install the water hose No. 1 and water hose No. 2 shown in the figure.
    G13713514Courtesy of MAZDA MOTORS CORP.
  3. Refill the engine coolant. (See ENGINE COOLANT REPLACEMENT .)
  4. Refill the water-cooled charge air cooler coolant. (See WATER-COOLED CHARGE AIR COOLER COOLANT REPLACEMENT .)
  5. Install the front under cover No. 1 and front under cover No. 2. (See FRONT UNDER COVER No. 1 REMOVAL/INSTALLATION .) (See FRONT UNDER COVER No. 2 REMOVAL/INSTALLATION .)
scientia non olet · About LEMON Manuals