Intake-Air System Removal/Installation: Notes
Replacement Part
| Gasket Quantity: 1 Location of use: Turbocharger air outlet pipe component |
| Charge air cooler air inlet hose Quantity: 1 Location of use: Turbocharger air outlet pipe component |
| Hose clamp Quantity: 1 Location of use: Charge air cooler air outlet hose |
| Gasket Quantity: 1 Location of use: Throttle body |
| Intake manifold gasket Quantity: 4 Location of use: Intake manifold |
Oil and Chemical Type
| Engine oil Type: Recommended oil |
WARNING:
- A hot engine and intake air system can cause severe burns. Turn off the engine and wait until they are cool before removing the intake air system.
- Disconnect the negative battery terminal. (See NEGATIVE BATTERY TERMINAL DISCONNECTION/CONNECTION (US) .)
- Remove in the order indicated in the table.
- Install in the reverse order of removal.