LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2021 >> 3 Turbo, 4D Hatchback >> Repair and Diagnosis >> Engine Mechanical >> Blowers, Superchargers & Turbochargers >> Intake-Air System And Turbocharger (VIN Y) >> Intake-Air System Removal/Installation >> Intake Manifold Component Installation Note

Intake Manifold Component Installation Note

  1. Install the intake manifold component.
  2. Connect the wiring harness clip shown in the figure.
    G13713511Courtesy of MAZDA MOTORS CORP.
  3. Install the following parts. (See ELECTRIC WATER PUMP REMOVAL/INSTALLATION .)
    • Electric water pump bracket
    • Electric water pump
  4. Install the EGR pipe No. 1 and EGR pipe No. 2. (See EGR PIPE REMOVAL/INSTALLATION .)
  5. Install the EGR valve. (See EGR VALVE REMOVAL/INSTALLATION .)
  6. Install the EGR cooler. (See EGR COOLER REMOVAL/INSTALLATION .)
scientia non olet · About LEMON Manuals