LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2021 >> 3 Preferred, 4D Hatchback, AWD >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> On-Board Diagnostic - Instrument Cluster >> PID/Data Monitor Table [Instrument Cluster (Us)]

PID/Data Monitor Table [Instrument Cluster (Us)]

PID/DATA MONITOR DESCRIPTION (INSTRUMENT CLUSTER - US)

PID Unit/Operation Data contents Module control terminal
ALH_HBC_SW Off/On  
  • Off: ALH/HBC switch is off.
  • On: ALH/HBC switch is on.
 -
ALH_HBC_SW_HIST Off/On  
  • Off: After connecting B+ power supply, ALH/HBC switch never turned on.
  • On: After connecting B+ power supply, ALH/HBC switch turned on at least once.
 -
ASC_SW Off/On  
  • Off: ASC switch is off.
  • On: ASC switch is on.
 -
ASC_SW_HIST Off/On  
  • Off: After connecting B+ power supply, ASC switch never turned on.
  • On: After connecting B+ power supply, ASC switch turned on at least once.
 -
CANCEL_SW Off/On  
  • Off: CANCEL switch is off.
  • On: CANCEL switch is on.
 -
CANCEL_SW_HIST Off/On  
  • Off: After connecting B+ power supply, CANCEL switch never turned on.
  • On: After connecting B+ power supply, CANCEL switch turned on at least once.
 -
CRUISE_SW Off/On  
  • Off: Cruise control switch is off.
  • On: Cruise control switch on.
 -
CRUISE_SW_HIST Off/On  
  • Off: After connecting B+ power supply, cruise control switch never turned on.
  • On: After connecting B+ power supply, cruise control switch turned on at least once.
 -
DAS_OFF_SW_HIST Off/On  
  • Off: After connecting B+ power supply, i-ACTIVSENSE switch never turned on.
  • On: After connecting B+ power supply, i-ACTIVSENSE switch turned on at least once.
 -
DAS_SW Off/On  
  • Off: i-ACTIVSENSE switch is off.
  • On: i-ACTIVSENSE switch is on.
 -
DIM_CANCEL Off/On  
  • Off: Dimmer cancel signal is not received.
  • On: Dimmer cancel signal is received.
 AM, AK
DIST_MINUS_SW Off/On  
  • Off: DISTANCE switch is not pressed in minus direction.
  • On: DISTANCE switch is pressed in minus direction.
 -
DIST_MINUS_SW_HIST Off/On  
  • Off: After connecting B+ power supply, DISTANCE switch never not pressed in minus direction.
  • On: After connecting B+ power supply, DISTANCE switch pressed in minus direction at least once.
 -
DIST_PLUS_SW Off/On  
  • Off: DISTANCE switch is not pressed in plus direction.
  • On: DISTANCE switch is pressed in plus direction.
 -
DIST_PLUS_SW_HIST Off/On  
  • Off: After connecting B+ power supply, DISTANCE switch never not pressed in plus direction.
  • On: After connecting B+ power supply, DISTANCE switch pressed in plus direction at least once.
 -
DPOS_D1_SW Off/On  
  • Off: Memory switch 1 is off.
  • On: Memory switch 1 is on.
 -
DPOS_D1_SW_HIST Off/On  
  • Off: After connecting B+ power supply, memory switch 1 never turned on.
  • On: After connecting B+ power supply, memory switch 1 turned on at least once.
 -
DPOS_D2_SW Off/On  
  • Off: Memory switch 2 is off.
  • On: Memory switch 2 is on.
 -
DPOS_D2_SW_HIST Off/On  
  • Off: After connecting B+ power supply, memory switch 2 never turned on.
  • On: After connecting B+ power supply, memory switch 2 turned on at least once.
 -
DPOS_SET_SW Off/On  
  • Off: SET switch is off.
  • On: SET switch is on.
 -
DPOS_SET_SW_HIST Off/On  
  • Off: After connecting B+ power supply, SET switch never turned on.
  • On: After connecting B+ power supply, SET switch turned on at least once.
 -
DSC_SW Off/On  
  • Off: DSC OFF switch is off.
  • On: DSC OFF switch is on.
 -
DSC_SW_HIST Off/On  
  • Off: After connecting B+ power supply, DSC OFF switch never turned on.
  • On: After connecting B+ power supply, DSC OFF switch turned on at least once.
 -
FUEL_GAUGE % Fuel gauge is displayed.
NOTE:
  • 0% indicated for 0 liters, 100% for 100 liters
 -
INFO_SW Off/On  
  • Off: INFO button is not pressed.
  • On: INFO button is pressed.
 -
I-STOP_OFF_SW  
NOTE:
  • Displays in the M-MDS but it does not operate.
I-STOP_OFF_SW_HIST  
NOTE:
  • Displays in the M-MDS but it does not operate.
LIM_SW  
NOTE:
  • Displays in the M-MDS but it does not operate.
LIM_SW_HIST  
NOTE:
  • Displays in the M-MDS but it does not operate.
MRCC_SW Off/On  
  • Off: MRCC switch is off.
  • On: MRCC switch is on.
 -
MRCC_SW_HIST Off/On  
  • Off: After connecting B+ power supply, MRCC switch never turned on.
  • On: After connecting B+ power supply, MRCC switch turned on at least once.
 -
MULTI_SW_STAT_A Normal/Failure  
  • Normal: Cluster switch is normal.
  • Failure: Cluster switch has a malfunction.
 -
MULTI_SW_STAT_B Normal/Failure  
  • Normal: Position memory switch is normal.
  • Failure: Position memory switch has a malfunction.
 -
PNL_CTRL_SW Off/Plus_Switch depressed/Minus_Switch depressed/Both_Switch depressed  
  • Off: Both switch are not depressed.
  • Plus_Switch depressed: Panel light control+ switch is depressed.
  • Minus_Switch depressed: Panel light control- switch is depressed.
  • Both_Switch depressed: Both switch are depressed.
 -
PNL_LGHT_CTRL_SW % Displays brightness to turn on panel lights AM, AK
PSM_OFF_SW Off/On  
  • Off: Parking sensor OFF switch is off.
  • On: Parking sensor OFF switch is on.
 -
PSM_OFF_SW_HIST Off/On  
  • Off: After connecting B+ power supply, parking sensor OFF switch never turned on.
  • On: After connecting B+ power supply, parking sensor OFF switch turned on at least once.
 -
R_FOG_SW  
NOTE:
  • Displays in the M-MDS but it does not operate.
R_FOG_SW_HIST  
NOTE:
  • Displays in the M-MDS but it does not operate.
RESUME_SW Off/On  
  • Off: RESUME switch is off.
  • On: RESUME switch is on.
 -
RESUME_SW_HIST Off/On  
  • Off: After connecting B+ power supply, RESUME switch never turned on.
  • On: After connecting B+ power supply, RESUME switch turned on at least once.
 -
REV_LAMP_STAT Off/On  
  • Off: Back-up light on signal is not sent from instrument cluster.
  • On: Back-up light on signal is sent from instrument cluster.
 AM, AK
SET_MINUS_SW Off/On  
  • Off: Lower switch is off.
  • On: Lower switch is on.
 -
SET_MINUS_SW_HIST Off/On  
  • Off: After connecting B+ power supply, lower switch never turned on.
  • On: After connecting B+ power supply, lower switch turned on at least once.
 -
SET_PLUS_SW_HIST Off/On  
  • Off: After connecting B+ power supply, Upper switch never turned on.
  • On: After connecting B+ power supply, Upper switch turned on at least once.
 -
SHIFT_DOWN_SW Off/On/Unknown  
  • Off: Down switch is not operated (pulled).
  • On: Down switch is operated (pulled).
  • Unknown: Steering shift switch operation is not determined.
 -
SHIFT_LVL_POS between 2 positions/P/R/N/D/S (2)/L (1)  
  • between 2 positions: Selector lever is between two positions.
  • P: Selector lever is in P position.
  • R: Selector lever is in R position.
  • N: Selector lever is in N position.
  • D: Selector lever is in D position.
  • S (2): Selector lever is in D position 2nd gear.
  • L (1): Selector lever is in D position 1st gear.
 AM, AK
SHIFT_UP_SW Off/On/Unknown  
  • Off: Up/off switch is not operated.
  • On: Up/off switch is operated.
  • Unknown: Steering shift switch operation is not determined.
 -
SPD_MTR % Displays the vehicle speed.
NOTE:
  • 0% indicated for 0 km/h, 100% for 300 km/h
 -
STR_SW Off/On  
  • Off: Steering switch is off.
  • On: Steering switch is on.
 -
TACHOMTR % Displays the engine speed.
NOTE:
  • 0% indicated for 0 rpm, 100% for 10000 rpm
 -
TJA_SW Off/On  
  • Off: TJA switch is off.
  • On: TJA switch is on.
 -
TJA_SW_HIST Off/On  
  • Off: After connecting B+ power supply, TJA switch never turned on.
  • On: After connecting B+ power supply, TJA switch turned on at least once.
 -
TLO_PLG_SW Off/On  
  • Off: Trunk lid opener switch (interior) is off.
  • On: Trunk lid opener switch (interior) is on.
 -
TLO_PLG_SW_HIST Off/On  
  • Off: After connecting B+ power supply, Trunk lid opener switch (interior) never turned on.
  • On: After connecting B+ power supply, Trunk lid opener switch (interior) turned on at least once.
 -
TNS_LAMP_STAT Off/On  
  • Off: Lights-on indicator light is turned off.
  • On: Lights-on indicator light is turned on.
 AM, AK
TRIP_SW Off/On  
  • Off: Tripmeter switch is off.
  • On: Tripmeter switch is on.
 -
TVM_OFF_SW Off/On  
  • Off: 360°view monitor switch is off.
  • On: 360°view monitor switch is on.
 -
TVM_OFF_SW_HIST Off/On  
  • Off: After connecting B+ power supply, 360°view monitor switch never turned on.
  • On: After connecting B+ power supply, 360°view monitor switch turned on at least once.
 -
VPWR V Displays the power supply voltage. -
scientia non olet · About LEMON Manuals