LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2021 >> 3 Base >> Repair and Diagnosis (Single Page) >> Brakes >> Mechanical - Hydraulic >> Conventional Brake System >> Vacuum Pump Removal/Installation (VIN M) (Us) >> Vacuum Pump and O-ring Installation Note

Vacuum Pump and O-ring Installation Note

  1. Rotate the vacuum pump by hand to drain the remainder of the engine oil in the vacuum pump.
  2. Degrease the O-ring installation groove and installation surface.
  3. Install the O-ring to the vacuum pump.
  4. Install the vacuum pump.
scientia non olet · About LEMON Manuals