Gap Adjustment

Verify that the gap between the hood and the body is within the specification.

Courtesy of MAZDA MOTORS CORP.

Standard clearance

a: 2.7-5.7 mm {0.11-0.22 in}

b: 2.5-4.0 mm {0.10-0.15 in}
- If the measured value exceeds the standard clearance, adjust the hood using the following procedure.
Loosen the bolts and adjust the hood.

Fig 1: Hood Hinge Bolts With Torque Specification
Courtesy of MAZDA MOTORS CORP.
Tighten the bolts. (See HOOD REMOVAL/INSTALLATION .)