LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2020 >> CX-5 Signature >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 16 (On-Board Diagnostic - Introduction (2 Of 2) [SKYACTIV-G 2.5 (With Cylinder Deactivation)]) >> Clearing DTC

Clearing DTC

WARNING: This page is about a different variant/trim than selected.
  1. Connect the M-MDS to the DLC-2.
  2. After the vehicle is identified, select the following items from the initialization screen of the M-MDS.
    1. Select "Self Test".
    2. Select "Modules".
    3. Select "PCM".
  3. Then, select the "Retrieve CMDTCs" and perform procedures according to the directions on the MMDS screen.
  4. Verify the DTC according to the directions on the M-MDS screen.
  5. Press the clear button on the DTC screen to clear the DTC.
  6. Verify that no DTCs are displayed.
  7. Switch the ignition off.
scientia non olet · About LEMON Manuals