LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2020 >> CX-5 Signature >> Repair and Diagnosis >> Engine Mechanical >> Blowers, Superchargers & Turbochargers >> Intake Air System And Turbocharger (VIN Y) >> Accelerator Pedal Removal/Installation

Accelerator Pedal Removal/Installation

  1. Disconnect the negative battery terminal. (See NEGATIVE BATTERY TERMINAL DISCONNECTION/CONNECTION .)
  2. Remove in the order indicated in the table.
    Fig 1: Removing/Installing Accelerator Pedal Components With Torque Specification
    G11436410Courtesy of MAZDA MOTORS CORP.
    COMPONENT DESCRIPTION

    1 Accelerator pedal
    2 APP sensor connector
  3. Install in the reverse order of removal.
scientia non olet · About LEMON Manuals