PID/Data Monitor Table

-: Not applicable

PID/DATA MONITOR DESCRIPTION (INSTRUMENT CLUSTER)

PID

Unit/Operation

Data contents

Module control terminal

AFS_ST ⁽¹⁾

Off/On

Off: Adaptive front lighting system (AFS) is not operated
On: Adaptive front lighting system (AFS) is operated

AT_MAN_M_SW⁽²⁾

Off/On/Reserved/Unknown

Off: M range switch is off.
On: M range switch is on.
Reserved:-
Unknown: M range switch signal is not determined.

AT_S_DWN_SW

Off/On/Reserved/Unknown

Off: Down switch switch is off.
On: Down switch is on.
Reserved:-
Unknown: Down switch is not determined.

AT_S_UP_SW

Off/On/Reserved/Unknown

Off: Up switch is off.
On: Up switch is on.
Reserved: -
Unknown: Up switch is not determined.

BSM/RVM_SW

Off/On

NOTE:

Displayed on M-MDS but does not function.

DIM_CSW ⁽⁷⁾

Off/On

Off: Dimmer cancel switc is off.
On: Dimmer cancel switc is on.

DSC_OFF_SW

Off/On

Off: TCS OFF switch is off.
On: TCS OFF switch is on.

FUEL_GAUGE

Fuel gauge is displayed.

FUEL_SEN_M

ohm

Fuel gauge sender unit resistance is displayed.

NOTE:

Displayed on M-MDS but does not function.

FUEL_SEN_S ⁽³⁾

ohm

Displays the fuel gauge sender unit (sub) resistance value.

NOTE:

Displayed on M-MDS but does not function.

I_ILLUMI_M

Off (Day)/On (Night)

Off (Day): TNS (parking lights) is turned off.
On (Night): TNS (parking lights) is turned on.

I-ST_OFF_SW

Off/On

NOTE:

Displayed on M-MDS but does not function.

LDWS_ON_SW⁽⁴⁾

Off/On

Off: LDWS switch is off.
On: LDWS switch is on.

MULTI_SW_ST

O.K./FAULT

O.K.: Cluster switch is normal.
FAULT: Cluster switch is malfunctioning.

ODO_CNT

km, Miles

Displays the rolling count of the odometer.

PCONSW ⁽⁷⁾

Displays the brightness of the illumination lights

P_BRAKE_SW⁽⁶⁾

Off/On

NOTE:

Displayed on M-MDS but does not function.

R_GEAR_SW

Off/On

ATX:

Displays in the M-MDS but it does not operate.

MTX:

Off: Back-up light switch is off.
On: Back-up light switch is on.

R_LMP

Off/On/Unknown/Fault

Off: Back-up light is turned off.
On: Back-up light is turned on.
Unknown: Back-up light signal is not determined.
Fault: Back-up light malfunction

SPEEDOMTR

NOTE:

Displayed on M-MDS but does not function.

TACHOMTR

RPM

Displays the engine speed.

TM_CLPOS ⁽⁷⁾

2Positions/P/R/N/D/S (2)/L (1)/?

Displays the selector lever position

TOTAL_TIME

hh:mm:ss

Cumulative elapsed time since vehicle completion is displayed.

TPMS_CAL_SW⁽⁵⁾

Off/On

Off: Tire pressure monitoring system set switch is off.
On: Tire pressure monitoring system set switch is on.

TPRE_LMOD ⁽⁵⁾

Normal/Error

This PID indicates supply voltage (wheel unit No. 4).

VPWR

Displays the power supply voltage.

WU1_ERR_P ⁽⁵⁾

Normal/Error

This PID indicates tire pressure status (wheel unit No. 1).

WU1_ERR_T ⁽⁵⁾

Normal/Error

This PID indicates tire air temperature status (wheel unit No. 1).

WU1_ID ⁽⁵⁾

HexData

This PID indicates registered wheel unit ID (wheel unit No. 1).

WU1_P ⁽⁵⁾

KPa, MPa

This PID indicates tire pressure (wheel unit No. 1).

WU1_T ⁽⁵⁾

°C, F

This PID indicates tire air temperature (wheel unit No. 1).

WU1_VPWR ⁽⁵⁾

Normal/Error

This PID indicates supply voltage (wheel unit No. 1).

WU2_ERR_P ⁽⁵⁾

Normal/Error

This PID indicates tire pressure status (wheel unit No. 2).

WU2_ERR_T ⁽⁵⁾

Normal/Error

This PID indicates tire air temperature status (wheel unit No. 2).

WU2_ID ⁽⁵⁾

HexData

This PID indicates registered wheel unit ID (wheel unit No. 2).

WU2_P ⁽⁵⁾

KPa, MPa

This PID indicates tire pressure (wheel unit No. 2).

WU2_T ⁽⁵⁾

°C, F

This PID indicates tire air temperature (wheel unit No. 2).

WU2_VPWR ⁽⁵⁾

Normal/Error

This PID indicates supply voltage (wheel unit No. 2).

WU3_ERR_P ⁽⁵⁾

Normal/Error

This PID indicates tire pressure status (wheel unit No. 3).

WU3_ERR_T ⁽⁵⁾

Normal/Error

This PID indicates tire air temperature status (wheel unit No. 3).

WU3_ID ⁽⁵⁾

HexData

This PID indicates registered wheel unit ID (wheel unit No. 3).

WU3_P ⁽⁵⁾

KPa, MPa

This PID indicates tire pressure (wheel unit No. 3).

WU3_T ⁽⁵⁾

°C, F

This PID indicates tire air temperature (wheel unit No. 3).

WU3_VPWR ⁽⁵⁾

Normal/Error

This PID indicates supply voltage (wheel unit No. 3).

WU4_ERR_P ⁽⁵⁾

Normal/Error

This PID indicates tire pressure status (wheel unit No. 4).

WU4_ERR_T ⁽⁵⁾

Normal/Error

This PID indicates tire air temperature status (wheel unit No. 4).

WU4_ID ⁽⁵⁾

HexData

This PID indicates registered wheel unit ID (wheel unit No. 4).

WU4_P ⁽⁵⁾

KPa, MPa

This PID indicates tire pressure (wheel unit No. 4).

WU4_T ⁽⁵⁾

°C, F

This PID indicates tire air temperature (wheel unit No. 4).

WU4_VPWR ⁽⁵⁾

Normal/Error

This PID indicates supply voltage (wheel unit No. 4).

⁽¹⁾	With adaptive front lighting system (AFS)

⁽²⁾

ATX

⁽³⁾

AWD

⁽⁴⁾	With lane departure warning system (LDWS)

⁽⁵⁾	With Tire Pressure Monitoring System (TPMS)

⁽⁶⁾	Except 2020MY

⁽⁷⁾

2020MY