PID/Data Monitor Table

-: Not applicable

PID/DATA MONITOR DESCRIPTION [INSTRUMENT CLUSTER (US)]

PID

Unit/Operation

Data contents

Module control terminal

ALH_HBC_SW

Off/On

Off: Adaptive LED headlight/High Beam Control System (HBC) switch is off.
On: Adaptive LED headlight/High Beam Control System (HBC) switch is on.

ALH_HBC_SW_HIST

Off/On

Off: After connecting B+ power supply, Adaptive LED headlight/High Beam Control System (HBC) switch never turned on.
On: After connecting B+ power supply, Adaptive LED headlight/High Beam Control System (HBC) switch turned on at least once.

ASC_SW

NOTE:

Displays in the M-MDS but it does not operate.

ASC_SW_HIST

NOTE:

Displays in the M-MDS but it does not operate.

CANCEL_SW

Off/On

Off: CANCEL switch is off.
On: CANCEL switch is on.

CANCEL_SW_HIST

Off/On

Off: After connecting B+ power supply, CANCEL switch never turned on.
On: After connecting B+ power supply, CANCEL switch turned on at least once.

CRUISE_SW

Off/On

Off: Cruise control switch is off.
On: Cruise control switch on.

CRUISE_SW_HIST

Off/On

Off: After connecting B+ power supply, cruise control switch never turned on.
On: After connecting B+ power supply, cruise control switch turned on at least once.

DAS_OFF_SW_HIST⁽¹⁾

Off/On

Off: After connecting B+ power supply, i-ACTIVSENSE switch never turned on.
On: After connecting B+ power supply, i-ACTIVSENSE switch turned on at least once.

DAS_SW⁽¹⁾

Off/On

Off: i-ACTIVSENSE switch is off.
On: i-ACTIVSENSE switch is on.

DIM_CANCEL

Off/On

Off: Dimmer cancel signal is not received.
On: Dimmer cancel signal is received.

AM, AK

DIST_MINUS_SW⁽²⁾

Off/On

Off: DISTANCE switch is not pressed in minus direction.
On: DISTANCE switch is pressed in minus direction.

DIST_MINUS_SW_HIST⁽²⁾

Off/On

Off: After connecting B+ power supply, DISTANCE switch never not pressed in minus direction.
On: After connecting B+ power supply, DISTANCE switch pressed in minus direction at least once.

DIST_PLUS_SW⁽²⁾

Off/On

Off: DISTANCE switch is not pressed in plus direction.
On: DISTANCE switch is pressed in plus direction.

DIST_PLUS_SW_HIST⁽²⁾

Off/On

Off: After connecting B+ power supply, DISTANCE switch never not pressed in plus direction.
On: After connecting B+ power supply, DISTANCE switch pressed in plus direction at least once.

DPOS_D1_SW⁽³⁾

Off/On

Off: Memory switch 1 is off.
On: Memory switch 1 is on.

DPOS_D1_SW_HIST⁽³⁾

Off/On

Off: After connecting B+ power supply, memory switch 1 never turned on.
On: After connecting B+ power supply, memory switch 1 turned on at least once.

DPOS_D2_SW⁽³⁾

Off/On

Off: Memory switch 2 is off.
On: Memory switch 2 is on.

DPOS_D2_SW_HIST⁽³⁾

Off/On

Off: After connecting B+ power supply, memory switch 2 never turned on.
On: After connecting B+ power supply, memory switch 2 turned on at least once.

DPOS_SET_SW⁽³⁾

Off/On

Off: SET switch is off.
On: SET switch is on.

DPOS_SET_SW_HIST⁽³⁾

Off/On

Off: After connecting B+ power supply, SET switch never turned on.
On: After connecting B+ power supply, SET switch turned on at least once.

DSC_SW

Off/On

Off: TCS OFF switch (without OFF-road Traction Assist)/OFF-road Traction Assist switch (with OFF-road Traction Assist) is off.
On: TCS OFF switch (without OFF-road Traction Assist)/OFF-road Traction Assist switch (with OFF-road Traction Assist) is on.

DSC_SW_HIST

Off/On

Off: After connecting B+ power supply, TCS OFF switch (without OFF-road Traction Assist)/OFF-road Traction Assist switch (with OFF-road Traction Assist) never turned on.
On: After connecting B+ power supply, TCS OFF switch (without OFF-road Traction Assist)/OFF-road Traction Assist switch (with OFF-road Traction Assist) turned on at least once.

FUEL_GAUGE

Fuel gauge is displayed.

NOTE:

0% indicated for 0 liters, 100% for 100 liters

INFO_SW

Off/On

Off: INFO button is not pressed.
On: INFO button is pressed.

AM, AK

I-STOP_OFF_SW

NOTE:

Displays in the M-MDS but it does not operate.

I-STOP_OFF_SW_HIST

NOTE:

Displays in the M-MDS but it does not operate.

LIM_SW

NOTE:

Displays in the M-MDS but it does not operate.

LIM_SW_HIST

NOTE:

Displays in the M-MDS but it does not operate.

MRCC_SW⁽²⁾

Off/On

Off: Mazda Radar Cruise Control (MRCC) switch is off.
On: Mazda Radar Cruise Control (MRCC) switch is on.

MRCC_SW_HIST⁽²⁾

Off/On

Off: After connecting B+ power supply, Mazda Radar Cruise Control (MRCC) switch never turned on.
On: After connecting B+ power supply, Mazda Radar Cruise Control (MRCC) switch turned on at least once.

MULTI_SW_STAT_A

Normal/Failure

Normal: Cluster switch is normal.
Failure: Cluster switch has a malfunction.

MULTI_SW_STAT_B

Normal/Failure

Normal: Position memory switch is normal.
Failure: Position memory switch has a malfunction.

PNL_CTRL_SW

Off/Plus_Switch depressed/Minus_Switch depressed/Both_Switch depressed

Off: Both switch are not depressed.
Plus_Switch depressed: Panel light control+ switch is depressed.
Minus_Switch depressed: Panel light control- switch is depressed.
Both_Switch depressed: Both switch are depressed.

PNL_LGHT_CTRL_SW

Displays brightness to turn on panel lights

AM, AK

PSM_OFF_SW⁽⁴⁾

Off/On

Off: Parking sensor switch is off.
On: Parking sensor switch is on.

PSM_OFF_SW_HIST⁽⁴⁾

Off/On

Off: After connecting B+ power supply, parking sensor OFF switch never turned on.
On: After connecting B+ power supply, parking sensor OFF switch turned on at least once.

R_FOG_SW

NOTE:

Displays in the M-MDS but it does not operate.

R_FOG_SW_HIST

NOTE:

Displays in the M-MDS but it does not operate.

RESUME_SW

Off/On

Off: RESUME switch is off.
On: RESUME switch is on.

RESUME_SW_HIST

Off/On

Off: After connecting B+ power supply, RESUME switch never turned on.
On: After connecting B+ power supply, RESUME switch turned on at least once.

REV_LAMP_STAT

Off/On

Off: Back-up light on signal is not sent from instrument cluster.
On: Back-up light on signal is sent from instrument cluster.

AM, AK

SET_MINUS_SW

Off/On

Off: SET - switch is off.
On: SET - switch is on.

SET_MINUS_SW_HIST

Off/On

Off: After connecting B+ power supply, SET - switch never turned on.
On: After connecting B+ power supply, SET - switch turned on at least once.

SET_PLUS_SW_HIST

Off/On

Off: After connecting B+ power supply, Upper switch never turned on.
On: After connecting B+ power supply, Upper switch turned on at least once.

SHIFT_DOWN_SW⁽⁵⁾

Off/On/Unknown

Off: Down switch is not operated (pulled).
On: Down switch is operated (pulled).
Unknown: Steering shift switch operation is not determined.

SHIFT_LVL_POS

between 2 positions/P/R/N/D/S (2)/L (1)

between 2 positions: Selector lever is between two positions.
P: Selector lever is in P position.
R: Selector lever is in R position.
N: Selector lever is in N position.
D: Selector lever is in D position.
S (2): Selector lever is in D position 2nd gear.
L (1): Selector lever is in D position 1st gear.

AM, AK

SHIFT_UP_SW⁽⁵⁾

Off/On/Unknown

Off: Up switch is not operated.
On: Up switch is operated.
Unknown: Steering shift switch operation is not determined.

SPD_MTR

Displays the vehicle speed.

NOTE:

0% indicated for 0 km/h, 100% for 300 km/h

STR_SW

Off/On

Off: Steering switch is off.
On: Steering switch is on.

TACHOMTR

Displays the engine speed.

NOTE:

0% indicated for 0 rpm, 100% for 10000 rpm

TJA_SW⁽⁶⁾

Off/On

Off: TJA switch is off.
On: TJA switch is on.

TJA_SW_HIST⁽⁶⁾

Off/On

Off: After connecting B+ power supply, TJA switch never turned on.
On: After connecting B+ power supply, TJA switch turned on at least once.

TLO_PLG_SW⁽⁷⁾

Off/On

Off: Power liftgate (PLG) front switch is off.
On: Power liftgate (PLG) front switch is on.

TLO_PLG_SW_HIST⁽⁷⁾

Off/On

Off: After connecting B+ power supply, power liftgate (PLG) front switch never turned on.
On: After connecting B+ power supply, power liftgate (PLG) front switch turned on at least once.

TNS_LAMP_STAT

Off (Daylight mode)/On (Night mode)

Off (Daylight mode): Lights-on indicator light is turned off.
On (Night mode): Lights-on indicator light is turned on.

AM, AK

TRIP_SW

Off/On

Off: Tripmeter switch is off.
On: Tripmeter switch is on.

TVM_OFF_SW⁽⁸⁾

Off/On

Off: 360°view monitor switch is off.
On: 360°view monitor switch is on.

TVM_OFF_SW_HIST⁽⁸⁾

Off/On

Off: After connecting B+ power supply, 360°view monitor switch never turned on.
On: After connecting B+ power supply, 360°view monitor switch turned on at least once.

VPWR

Displays the power supply voltage.

⁽¹⁾	With i-ACTIVSENSE switch

⁽²⁾	With Mazda Radar Cruise Control (MRCC) system

⁽³⁾	With power seat system

⁽⁴⁾	With parking sensor system

⁽⁵⁾	With steering shift switch

⁽⁶⁾	With Traffic Jam Assist (TJA)

⁽⁷⁾	With power liftgate (PLG) system

⁽⁸⁾	With 360°view monitor system