Diagnostic Procedure
DTC U0402:68 (ACTIVE DRIVING DISPLAY) DIAGNOSTIC PROCEDURE
| Step | Inspection | Action | |
|---|---|---|---|
| 1 | VERIFY DTCs FOR TCM
|
Yes | Repair the malfunctioning part according to the applicable DTC troubleshooting. (See ON-BOARD DIAGNOSTIC SYSTEM DTC TABLE [TCM (EW6A-EL/EW6AX-EL)] .) |
| No | Go to the next step. | ||
| 2 | DRIVE VEHICLE THEN VERIFY DTCs FOR TCM AGAIN
|
Yes | Repair the malfunctioning part according to the applicable DTC troubleshooting. (See ON-BOARD DIAGNOSTIC SYSTEM DTC TABLE [TCM (EW6A-EL/EW6AX-EL)] .) |
| No | Go to the next step. | ||
| 3 | VERIFY THAT REPAIRS HAVE BEEN COMPLETED
|
Yes | Replace the active driving display, then go to the next step. (See ACTIVE DRIVING DISPLAY REMOVAL/INSTALLATION .) |
| No | Go to the next step. | ||
| 4 | VERIFY IF OTHER DTCs DISPLAYED
|
Yes | Repair the malfunctioning part according to the applicable DTC troubleshooting. (See DTC TABLE (ACTIVE DRIVING DISPLAY) .) |
| No | DTC troubleshooting completed. | ||