LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2020 >> 6 Sport >> Repair and Diagnosis >> Engine Performance >> Testing & Diagnosis >> On-Board Diagnostics - Introduction (2 Of 2) (SKYACTIVE-G 2.5 (With Cylinder Deactivation)) >> Clearing DTC

Clearing DTC

  1. Connect the M-MDS to the DLC-2.
  2. After the vehicle is identified, select the following items from the initialization screen of the M-MDS.
    1. Select "Self Test".
    2. Select "Modules".
    3. Select "PCM".
  3. Then, select the "Retrieve PCM DTCs" and perform procedures according to the directions on the M-MDS screen.
  4. Verify the DTC according to the directions on the M-MDS screen.
  5. Press the clear button on the DTC screen to clear the DTC.
  6. Verify that no DTCs are displayed.
  7. Switch the ignition off.
scientia non olet · About LEMON Manuals