LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2019 >> 6 Signature >> Repair and Diagnosis >> Engine Mechanical >> Blowers, Superchargers & Turbochargers >> Intake Air System And Turbocharger (VIN Y) >> Check Valve (Intake-Air System) Removal/Installation >> Notes

Check Valve (Intake-Air System) Removal/Installation: Notes

  1. Remove the plug hole plate. (See PLUG HOLE PLATE REMOVAL/INSTALLATION (VIN Y) .)
  2. Remove in the order indicated in the table.
    Fig 1: Vacuum Hose And Check Valve (Intake-Air System)
    G12229089Courtesy of MAZDA MOTORS CORP.
    COMPONENT DESCRIPTION

    1 Vacuum hose
    2 Check valve
    (See Check Valve Installation Note .)
  3. Install in the reverse order of removal.
scientia non olet · About LEMON Manuals