LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2018 >> CX-9 Touring, AWD >> Repair and Diagnosis >> Engine Mechanical >> Blowers, Superchargers & Turbochargers >> Intake- Air System And Turbocharger >> Wastegate Valve Actuator Inspection >> Continuity Inspection

Continuity Inspection

  1. Disconnect the negative battery terminal. (See NEGATIVE BATTERY TERMINAL DISCONNECTION/CONNECTION .)
  2. Disconnect the wastegate valve actuator connector. (See Dynamic Pressure Turbo Removal/Installation .)
  3. Inspect for continuity between wastegate valve actuator terminals B and F.
    Fig 1: Wastegate Valve Actuator Connector Terminals
    G11436259Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals