LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2018 >> CX-9 Touring, AWD >> Repair and Diagnosis >> Engine Mechanical >> Blowers, Superchargers & Turbochargers >> Intake- Air System And Turbocharger >> Accelerator Pedal Removal/Installation

Accelerator Pedal Removal/Installation

  1. Disconnect the negative battery terminal. (See NEGATIVE BATTERY TERMINAL DISCONNECTION/CONNECTION .)
  2. Remove in the order indicated in the table.
    Fig 1: APP Sensor Connector, Accelerator Pedal And Bolts With Torque Specification
    G12244251Courtesy of MAZDA MOTORS CORP.
    COMPONENT DESCRIPTION

    1 Accelerator pedal
    2 APP sensor connector
  3. Install in the reverse order of removal.
scientia non olet · About LEMON Manuals