LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2018 >> CX-9 Touring, AWD >> Repair and Diagnosis >> Body & Frame >> Exterior/Interior Trim >> Exterior Trim >> Front Under Cover No. 1 Removal/Installation

Front Under Cover No. 1 Removal/Installation

  1. Lift up the vehicle.
  2. Remove the bolts and fasteners.
    Fig 1: Removing Front Under Cover No. 1 Bolts And Fasteners With Torque Specifications
    G11431115Courtesy of MAZDA MOTORS CORP.
  3. Remove the screws.
  4. Move the front under cover No. 1 in the direction of the arrow shown in the figure and remove it.
    Fig 2: Moving Front Under Cover No. 1 In Direction
    G12266144Courtesy of MAZDA MOTORS CORP.
  5. Install in the reverse order of removal.
scientia non olet · About LEMON Manuals