LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2018 >> CX-9 Signature >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Intake- Air System And Turbocharger >> Intake-Air System Removal/Installation >> Charge Air Cooler Inlet Hose Removal Note

Charge Air Cooler Inlet Hose Removal Note

  1. Remove the front under cover No. 1. (See FRONT UNDER COVER NO. 1 REMOVAL/INSTALLATION .)
  2. Remove the front under cover No. 2. (See FRONT UNDER COVER NO. 2 REMOVAL/INSTALLATION .)
  3. Release the lock and remove the charge air cooler inlet hose as shown in the figure.
    Fig 1: Turbocharger Air Outlet Pipe Components
    G11436441Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals