LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2018 >> 6 Signature >> Repair and Diagnosis >> Engine Mechanical >> Blowers, Superchargers & Turbochargers >> Intake Air System And Turbocharger (VIN Y) >> Intake-Air System Removal/Installation >> Charge Air Cooler Outlet Hose Installation Note

Charge Air Cooler Outlet Hose Installation Note

  1. Install the charge air cooler outlet hose as shown in the figure below.
    Fig 1: Aligning Projection Of Hose With Grove On Throttle Body
    G11436444Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals