LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2017 >> CX-9 Touring, FWD >> Repair and Diagnosis >> Engine Mechanical >> Blowers, Superchargers & Turbochargers >> Intake-Air System And Turbocharger >> Check Valve (Intake-Air System) Removal/Installation >> Notes

Check Valve (Intake-Air System) Removal/Installation: Notes

  1. Remove the plug hole plate. (See PLUG HOLE PLATE REMOVAL/INSTALLATION .)
  2. Remove in the order indicated in the table.
    Fig 1: Removing Check Valve (Intake-Air System)
    G11436425Courtesy of MAZDA
    COMPONENT DESCRIPTION

    1 Vacuum hose
    2 Check valve
    (See Check Valve Installation Note .)
  3. Install in the reverse order of removal.
scientia non olet · About LEMON Manuals