Pedal Height Inspection
- Measure the distance from the center of the upper surface of the pedal pad to the floor covering and verify that it is as specified.
Brake pedal height (reference value)
136.6 mm {5.378 in}
- If not within the specification, inspect the following items and repair or replace the applicable part if there is any malfunction.
- Power brake unit installation condition
- Deformation of or damage to the power brake unit fork
- Brake pedal installation condition
- Clevis pin wear
- If there is no malfunction in the above items, replace the brake pedal. (See BRAKE PEDAL REMOVAL/INSTALLATION .)
- If not within the specification, inspect the following items and repair or replace the applicable part if there is any malfunction.