DTC U2300-54; U2300-55; U2300-56; U2300-64; Configuration Malfunction: Notes

DTC U2300:54/U2300:55/U2300:56/U2300:64 (DSC HU/CM) DETECTION CONDITION AND POSSIBLE CAUSE

DTC	U2300:54	Configuration
	U2300:55
	U2300:56
	U2300:64
DETECTION CONDITION		Configuration error is detected.
FAIL-SAFE FUNCTION		Refer to "Fail-safe function table". (See DTC TABLE [DSC HU/CM] .)
POSSIBLE CAUSE		Configuration procedure is not done properly Correct data cannot be received from instrument cluster Another vehicles control modules (instrument cluster, PCM, DSC HU/CM) been installed
SYSTEM WIRING DIAGRAM		-