DTC C0063-28; C0063-54; C0063-64; Yaw Rate Signal Malfunction: Notes

DTC C0063:28/C0063:54/C0063:64 (DSC HU/CM) DETECTION CONDITION AND POSSIBLE CAUSE

DTC	C0063:28	Yaw rate signal
	C0063:54
	C0063:64
DETECTION CONDITION		C0063:28 Yaw rate sensor signal outside of specified value. C0063:54 No yaw rate sensor initialization is detected. C0063:64 Difference between yaw rate calculated by each sensor and yaw rate received from yaw rate sensor outside of specified value is detected.
FAIL-SAFE FUNCTION		Refer to "Fail-safe function table". (See DTC TABLE [DSC HU/CM] .)
POSSIBLE CAUSE		The initialization procedure for the yaw rate sensor has not been performed SAS control module malfunction DSC HU/CM malfunction
SYSTEM WIRING DIAGRAM		-