DTC C0062-28; C0062:54 C0062-64; Longitudinal-G Signal Malfunction: Notes
DETECTION CONDITION AND POSSIBLE CAUSE
| DTC |
C0062:28 |
Longitudinal-G signal |
| C0062:54 |
| C0062:64 |
| DETECTION CONDITION |
- C0062:28
- Longitudinal-G sensor signal outside of specified value.
- C0062:54
- No longitudinal-G sensor initialization is detected.
- C0062:64
- Difference between longitudinal-G calculated by each sensor and longitudinal-G received from low-G sensor outside of specified value is detected.
|
| FAIL-SAFE FUNCTION |
|
| POSSIBLE CAUSE |
- The initialization procedure for the low-G sensor has not been performed
- SAS control module malfunction
- DSC HU/CM malfunction
|
| SYSTEM WIRING DIAGRAM |
- |