DTC C0061-28; C0061-54; C0061-64; Lateral-G Signal Malfunction: Notes
DETECTION CONDITION AND POSSIBLE CAUSE
| DTC |
C0061:28 |
Lateral-G signal |
| C0061:54 |
| C0061:64 |
| DETECTION CONDITION |
- C0061:28
- Low-G sensor signal outside of specified value.
- C0061:54
- No low-G sensor initialization is detected.
NOTE:
- If the vehicle is driven as follow, the DSC HU/CM may store DTC C0061:54.
- Vehicle is driven on a banked road.
- If the DTC is a past malfunction during DTC inspection, it does not indicate a vehicle malfunction.
- C0061:64
- Difference between lateral-G calculated by each sensor and lateral-G received from low-G sensor outside of specified value is detected.
|
| FAIL-SAFE FUNCTION |
|
| POSSIBLE CAUSE |
- The initialization procedure for the low-G sensor has not been performed
- SAS control module malfunction
- DSC HU/CM malfunction
|
| SYSTEM WIRING DIAGRAM |
- |