LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2017 >> CX-9 Touring, AWD >> Repair and Diagnosis (Single Page) >> Body & Frame >> Exterior/Interior Trim >> Exterior Trim >> Radiator Grille Disassembly/Assembly >> Without signature wing illumination

Without signature wing illumination

  1. Disassemble in the order indicated in the table.
    Fig 1: Disassembling/Assembling Radiator Grille Components
    G11431131Courtesy of MAZDA MOTORS CORP.
    COMPONENT DESCRIPTION

    1 Rivet
    (See Rivet Removal Note .)
    2 Front bumper upper face
    3 Upper grille bracket (RH)
    4 Upper grille bracket (LH)
    5 Plate
    6 Upper grille bracket
    7 Grille bracket
    8 Locator pin
    9 Bracket
    10 Bracket
    11 Radiator grille reinforcement
    12 Grille garnish (With grille garnish)
    13 Clip
    (See Clip Removal Note .)
    14 Lower grille molding (RH)
    15 Lower grille molding (LH)
    16 Protector
    17 Mascot base (With Mazda radar cruise control (MRCC) system)
    18 Mascot (With Mazda radar cruise control (MRCC) system)
    19 Mascot base (Without Mazda radar cruise control (MRCC) system)
    20 Mascot (Without Mazda radar cruise control (MRCC) system)
  2. Assemble in the reverse order of disassembly.
scientia non olet · About LEMON Manuals