Fuel-filler Lid Opener Lever

While pulling the fuel-filler lid opener lever, insert a remover tool into the position shown in the figure.

Fig 1: Pulling Fuel-Filler Lid Opener Lever
Courtesy of MAZDA MOTORS CORP.
Insert a tape-wrapped flathead screwdriver into the position shown in the figure and rotate it in the direction of arrow (1) to detach the fuel-filler lid opener lever from the Driver's side lower panel.
CAUTION:
- Be careful not to damage the fuel-filler lid opener lever with the flathead screwdriver.
Disconnect the fuel-filler lid opener cable from the fuel-filler lid opener lever.

Fig 2: Locating Fuel-Filler Lid Opener Cable
Courtesy of MAZDA MOTORS CORP.
Install in the reverse order of removal.