LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2017 >> CX-5 Touring, AWD >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Seats >> Rear Seat Warmer Unit Inspection >> LH-Side >> Seat back side

Seat back side

  1. Switch the ignition to off.
  2. Disconnect the negative battery terminal and wait for 1 min or more. (See NEGATIVE BATTERY TERMINAL DISCONNECTION/CONNECTION .)
  3. Remove the rear seat. (See REAR SEAT BACK REMOVAL/INSTALLATION .)
  4. Inspect for continuity between the seat warmer unit connector (short code) terminal A and B.
    Fig 1: Checking Continuity Between Seat Warmer Unit Connector (Short Code) Terminal A And B
    G11426500Courtesy of MAZDA MOTORS CORP.
    Fig 2: Seat Warmer Unit Connector Terminal A And B Continuity Chart (Driver-Side)
    G09076948Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals