Diagnostic Procedure
DIAGNOSTIC PROCEDURE DESCRIPTION
| Step | Inspection | Action | |
|---|---|---|---|
| 1 | IDENTIFY MALFUNCTIONING WHEEL UNIT
|
Yes | Replace and register the malfunctioning wheel unit, then go to the next step. (See WHEEL UNIT REMOVAL/INSTALLATION .) (See WHEEL UNIT ID REGISTRATION .) |
| No | Go to the next step. | ||
| 2 | VERIFY INSTRUMENT CLUSTER DTC
|
Yes | Replace the instrument cluster, then go to the next step. (See INSTRUMENT CLUSTER REMOVAL/INSTALLATION .) |
| No | Go to the next step. | ||
| 3 | VERIFY NO DTC IS PRESENT
|
Yes | Go to the applicable DTC inspection. (See DTC TABLE [INSTRUMENT CLUSTER (TPMS)] .) |
| No | DTC troubleshooting completed. | ||