LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2017 >> CX-5 Grand Select, FWD >> Repair and Diagnosis >> Suspension >> Front Suspension >> Front Suspension System >> Front Shock Absorber And Coil Spring Disassembly/Assembly >> Mounting Rubber Installation Note

Mounting Rubber Installation Note

  1. Install the mounting rubber so that the mounting rubber stud and the front shock absorber bracket are in position A shown in the following figure.
    Fig 1: Checking Clearance Between Mounting Rubber Stud And Front Shock Absorber Bracket
    G09074667Courtesy of MAZDA

    A: 0°±5° 

scientia non olet · About LEMON Manuals