Diagnostic Procedure
DIAGNOSTIC PROCEDURE
| Step | Inspection | Action | |
|---|---|---|---|
| 1 | INSPECT FOR DSC HU/CM MALFUNCTION
|
Yes | Go to applicable DTC inspection. (See DTC TABLE [DYNAMIC STABILITY CONTROL (DSC)] .) DTC troubleshooting completed, then go to the next step. |
| No | Go to the next step. | ||
| 2 | VERIFY DTC TROUBLESHOOTING COMPLETED
|
Yes | Replace the DSC HU/CM. (See ELECTRIC POWER STEERING (EPS) ON-BOARD DIAGNOSIS [ELECTRIC POWER STEERING (EPS)] .) |
| No | DTC troubleshooting completed. | ||