Diagnostic Procedure
DIAGNOSTIC PROCEDURE
| Step | Inspection | Action | |
|---|---|---|---|
| 1 | INSPECT FOR THE START STOP UNIT MALFUNCTION
|
Yes | Go to applicable DTC inspection. (See DTC TABLE [START STOP UNIT] .) DTC troubleshooting completed, then go to the next step. |
| No | Go to the next step. | ||
| 2 | VERIFY DTC TROUBLESHOOTING COMPLETED
|
Yes | Replace the start stop unit. (See START STOP UNIT REMOVAL/INSTALLATION .) |
| No | DTC troubleshooting completed. | ||