DTC U0001-88; U0100-00; U0121-00; U0126-00; U0155-00; U0214-00; U023A:00; Can System Communication Errors: Notes

DETECTION CONDITION & POSSIBLE CAUSE

DTC	U0001:88	CAN system communication error
	U0100:00	Communication error to PCM
	U0121:00	Communication error to DSC HU/CM
	U0126:00	Communication error to SAS control module
	U0155:00	Communication error to instrument cluster
	U0214:00	Communication error to start stop unit
	U023A:00	Communication error to forward sensing camera (FSC)
Detection condition	U0001:88 Error detected in line between CAN connection module and CAN bus communication line U0100:00 Communication error to PCM is detected in CAN communication U0121:00 Communication error to DSC CM is detected in CAN communication U0126:00 Communication error to SAS control module is detected in CAN communication U0155:00 Communication error to instrument cluster is detected in CAN communication U0214:00 Communication error to start stop unit is detected in CAN communication U023A:00 Communication error to forward sensing camera (FSC) is detected in CAN communication
Fail-safe function	Refer to "Fail-safe Function Table". (See ELECTRIC POWER STEERING (EPS) ON-BOARD DIAGNOSIS [ELECTRIC POWER STEERING (EPS)] .)
Possible cause	CAN system wiring harness open or short circuit with PCM CAN system wiring harness open or short circuit with DSC HU/CM CAN system wiring harness open or short circuit with SAS control module CAN system wiring harness open or short circuit with instrument cluster CAN system wiring harness open or short circuit with start stop unit CAN system wiring harness open or short circuit with forward sensing camera (FSC) Poor connection at connectors
System wiring diagram	-