| Insufficient air (or no air) blown from vents |
- Problem with each vent and/or duct
- Airflow mode does not change
|
(See INSUFFICIENT AIR (OR NO AIR) BLOWN FROM VENTS [FULL-AUTO AIR CONDITIONER] .) |
| Amount of air blown from vents does not change |
- Malfunction in blower system
|
(See AMOUNT OF AIR BLOWN FROM VENTS DOES NOT CHANGE [FULL-AUTO AIR CONDITIONER] .) |
| Air intake mode does not change |
- Air intake mode does not change when switching REC/FRESH mode
|
(See AIR INTAKE MODE DOES NOT CHANGE [FULL-AUTO AIR CONDITIONER] .) |
| No temperature control with climate control unit |
- Temperature does not change when operating temperature control dial
- Malfunction in A/C unit and/or climate control unit air mix system
- Malfunction in driver and/or passenger side air mix actuator or related wiring harness
|
(See NO TEMPERATURE CONTROL WITH CLIMATE CONTROL UNIT [FULL-AUTO AIR CONDITIONER] .) |
| Windshield fogged |
|
(See WINDSHIELD FOGGED [FULL-AUTO AIR CONDITIONER] .) |
| Air from vents not cold enough |
- Magnetic clutch operates but A/C system malfunctions
|
(See AIR FROM VENTS NOT COLD ENOUGH [FULL-AUTO AIR CONDITIONER] .) |
| No cool air |
- Magnetic clutch does not operate
|
(See NO COOL AIR [FULL-AUTO AIR CONDITIONER] .) |
| Noise while operating A/C system |
- Noise from magnetic clutch, A/C compressor, hose or refrigerant line
|
(See NOISE WHILE OPERATING A/C SYSTEM [FULL-AUTO AIR CONDITIONER] .) |
| Dual A/C control does not operate |
- Driver or passenger side temperature control dial does not operate individually
- Temperature control operates normally except for dual A/C control function
|
(See DUAL A/C CONTROL DOES NOT OPERATE [FULL-AUTO AIR CONDITIONER] .) |