DTC U0402-68; Error Signal Received From Transaxle: Notes

WARNING: This page is about a different variant/trim than selected.

DETECTION CONDITION & POSSIBLE CAUSE

DTC U0402:68	Error signal received from transaxle
DETECTION CONDITION	The instrument cluster received error signals from the transaxle for 1 s or more with the ignition switched ON (engine off or on).
FAIL-SAFE FUNCTION	AWD operates by the specified data.
POSSIBLE CAUSE	The transaxle could not send a normal signal temporarily. (DTCs are stored in the TCM.) Transaxle malfunction Instrument cluster malfunction
SYSTEM WIRING DIAGRAM	-