LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2017 >> CX-5 Grand Select, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 97 (Exterior Trim) >> Rear Door Garnish Removal/Installation >> Rear Door Garnish Installation Note

Rear Door Garnish Installation Note

WARNING: This page is about a different car, the 2017 Mazda 3. However, it is still accessible from the selected car via links, so may be relevant.
  1. When installing a new rear door garnish, perform the following procedure.
    1. Remove the double-sided adhesive tape on the rear door sash.
    2. Remove any grease or dirt from the affixing surface of the rear door sash.
scientia non olet · About LEMON Manuals