LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2017 >> CX-5 Grand Select, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 97 (Exterior Trim) >> Floor Under Cover Removal/Installation >> Floor Under Cover No. 1

Floor Under Cover No. 1

WARNING: This page is about a different car, the 2017 Mazda 3. However, it is still accessible from the selected car via links, so may be relevant.
  1. Lift up the vehicle.
  2. Remove the bolts.
    Fig 1: Locating Bolts On Floor Under Cover No. 1
    G11448851Courtesy of MAZDA MOTORS CORP.
  3. Remove the nuts.
  4. Remove the fasteners.
  5. Remove the cap nuts.
  6. Remove the floor under cover No. 1 (LH).
  7. Remove the floor under cover No. 1 (RH).
  8. Remove the clips.
  9. Install in the reverse order of removal.
scientia non olet · About LEMON Manuals