LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2017 >> CX-5 Grand Select, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 94 (Engine Mechanical System) >> Front Oil Seal Replacement >> Crankshaft Pulley Lock Bolt Removal Note

Crankshaft Pulley Lock Bolt Removal Note

WARNING: This page is about a different car, the 2017 Mazda 3. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
  • To prevent damage to the crankshaft pulley, protect the crankshaft pulley with a clean cloth so that the bar part (205-072) of the SST does not contact the crankshaft pulley.
  • To prevent damage to the engine front cover, be careful not to allow the tab part (49 B011 105) of the SST to get caught between the crankshaft pulley and the engine front cover.
  1. Hold the crankshaft pulley using the SSTs.
    Fig 1: Holding Crankshaft Pulley Using SSTS
    G09074257Courtesy of MAZDA MOTORS CORP.
  2. Remove the crankshaft pulley lock bolt.
scientia non olet · About LEMON Manuals