LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2017 >> CX-5 Grand Select, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 94 (Engine Mechanical System) >> Engine Tune-Up >> Idle Speed Inspection

Idle Speed Inspection

WARNING: This page is about a different car, the 2017 Mazda 3. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
  • The idle speed cannot be adjusted.
  • The M-MDS is required to verify the idle speed.
  1. Complete the engine tune-up preparation. (See ENGINE TUNE-UP PREPARATION .)
  2. Verify that the idle speed (M-MDS PID: RPM) is within the specification using the PID/data monitor function of the M-MDS. (See PCM INSPECTION .)
    • If there is a malfunction, refer to "ENGINE SYMPTOM TROUBLESHOOTING". (See SYMPTOM DIAGNOSTIC INDEX .)

      Idle speed (MTX: Neutral position, ATX: P position or N position) 

      MTX: 500-600 RPM

      ATX: 550-650 RPM

scientia non olet · About LEMON Manuals