LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2017 >> CX-5 Grand Select, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 94 (Engine Mechanical System) >> Electric Variable Valve Timing Actuator, Hydraulic Variable Valve Timing Actuator Removal/Installation >> Hydraulic Variable Valve Timing Actuator Removal Note

Hydraulic Variable Valve Timing Actuator Removal Note

WARNING: This page is about a different car, the 2017 Mazda 3. However, it is still accessible from the selected car via links, so may be relevant.
  1. Lock the exhaust camshaft against rotation by holding the exhaust camshaft with a vise and securing the cast hexagon with a wrench.
    Fig 1: Holding Exhaust Camshaft With Vise
    G09074133Courtesy of MAZDA MOTORS CORP.
  2. Loosen the hydraulic variable valve timing actuator installation bolt and remove the actuator.
scientia non olet · About LEMON Manuals