Water Pump Drive Belt
WARNING: This page is about a different car, the 2017 Mazda 3. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
- The water pump drive belt deflection/tension inspection is not necessary with the adoption of the stretch-type water pump drive belt.
- Visually inspect or feel that there is no wear, damage, or cracking on the inside and sides of the entire belt.
- Even if there is a little wear, damage, or cracking, replace the water pump drive belt. (See DRIVE BELT REMOVAL/INSTALLATION .)
- Start the engine to verify that abnormal noise does not occur.
- If abnormal noise occurs, replace the water pump drive belt. (See DRIVE BELT REMOVAL/INSTALLATION .)