LEMON Manuals
: Even more car manuals for everyone
Home
>>
Mazda
>>
2017
>>
CX-5 Grand Select, FWD
>>
Repair and Diagnosis
>>
External Pages
>>
Different car
>>
Section 91 (Engine Control System)
>>
Pcm Inspection
>>
Without Using the M-MDS
>>
Inspection Using An Oscilloscope (Reference)
>>
A/F sensor heater control signal
A/F sensor heater control signal
WARNING:
This page is about a different car, the 2017 Mazda 3. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: A/F Sensor Heater Control Signal Waveform
Courtesy of MAZDA MOTORS CORP.
PCM terminals
1 BY(+)-body ground(-)
Oscilloscope setting
5 V/DIV (Y), 50 ms/DIV (X), DC range
Vehicle condition
Idle after warm up