LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2017 >> CX-5 Grand Select, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 90 (Charging System - Engine) >> Negative Battery Cable Disconnection/Connection [SKYACTIV-G 2.0, SKYACTIV-G 2.5] >> With i-ELOOP >> Negative battery cable terminal connection

Negative battery cable terminal connection

WARNING: This page is about a different car, the 2017 Mazda 3. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
  • Connect the negative battery cable before connecting the current sensor connector. If the current sensor connector is connected first, the PCM may mistakenly recognize a signal from the current sensor and learn the battery condition incorrectly.
  • Verifying the tightness while holding the current sensor may apply excessive force to the terminal and the terminal could loosen, causing poor engine starting. When verifying the tightness of the negative battery cable terminal, only hold the terminal area, not the current sensor.
Fig 1: Negative Battery Cable Terminal Connection Area
G09785422Courtesy of MAZDA MOTORS CORP.
  1. Perform services required after connecting the negative battery cable terminal. (See Required Procedure After Negative Battery Cable Disconnection/Connection .)
scientia non olet · About LEMON Manuals