LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2017 >> CX-5 Grand Select, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 90 (Charging System - Engine) >> GENERATOR REMOVAL/INSTALLATION [SKYACTIV-G 2.0, SKYACTIV-G 2.5 (WITHOUT i-ELOOP)] >> Generator Installation Note

Generator Installation Note

WARNING: This page is about a different car, the 2017 Mazda 3. However, it is still accessible from the selected car via links, so may be relevant.
  1. To facilitate the installation of the generator to the engine, grasp the spacer in the bolt installation hole using pliers and push it down to the nut side.
    Fig 1: Pushing Down Nut Side Using Pliers
    G09784546Courtesy of MAZDA MOTORS CORP.
  2. Temporarily install the generator to the engine with the bolt c.
    Fig 2: Installing Engine Generator Bolt C
    G09785427Courtesy of MAZDA MOTORS CORP.
  3. Align the generator fixing hole with the engine side hole, then temporarily tighten the generator installation bolt B.
  4. Securely tighten the generator installation bolts in the order of B, C.
scientia non olet · About LEMON Manuals