LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2017 >> CX-5 Grand Select, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 90 (Charging System - Engine) >> GENERATOR DISASSEMBLY/ASSEMBLY [SKYACTIV-G 2.0, SKYACTIV-G 2.5 (WITHOUT i-ELOOP)] >> Brush Disassembly Note

Brush Disassembly Note

WARNING: This page is about a different car, the 2017 Mazda 3. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
  • Melt the solder quickly, otherwise the diodes (rectifier) and brush holder will be damaged by excessive heat.
Fig 1: Diodes (Rectifier) And Brush Holder Solder Area
G11450545Courtesy of MAZDA MOTORS CORP.
  1. Melt the solder and remove the brush from the brush holder.
scientia non olet · About LEMON Manuals