LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2017 >> CX-5 Grand Select, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 88 (Rear Suspension System) >> Rear Stabilizer Removal/Installation (2WD) >> Rear Stabilizer Bracket Removal Note

Rear Stabilizer Bracket Removal Note

WARNING: This page is about a different car, the 2016 Mazda CX-5. However, it is still accessible from the selected car via links, so may be relevant.
  1. Secure the rear stabilizer bracket flange using a vise.
Fig 1: Securing Rear Stabilizer Bracket Flange Using Vise
G10936503Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals