LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2017 >> CX-5 Grand Select, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 87 (On-Board Diagnostic - Engine Controls (4 Of 4)) >> DTC U3000-41: Pcm Processor Error >> Notes

DTC U3000-41: Pcm Processor Error: Notes

WARNING: This page is about a different car, the 2016 Mazda CX-5. However, it is still accessible from the selected car via links, so may be relevant.
DTC U3000:41 PCM processor error
DETECTION CONDITION 
  • Communication error in the PCM.

    Diagnostic support note 

  • This is a continuous monitor (other).
  • The check engine light does not illuminate.
  • FREEZE FRAME DATA (Mode 2)/Snapshot data is not available.
  • DTC is not stored in the PCM memory.
FAIL-SAFE FUNCTION  Not applicable
POSSIBLE CAUSE 
  • PCM internal malfunction
SYSTEM WIRING DIAGRAM  Not applicable