DTC U0001-88: U0100-00: U0101-00: U0121-00: U0151-00: U0155-00: Communication Error
WARNING: This page is about a different car, the 2016 Mazda CX-5. However, it is still accessible from the selected car via links, so may be relevant.
| Description |
- U0001:88
- Unit communication error (HS-CAN)
- U0100:00
- Communication error with PCM
- U0101:00
- Communication error with TCM
- U0121:00
- Communication error with DSC HU/CM
- U0151:00
- Communication error with SAS control module
- U0155:00
- Communication error with instrument cluster
|
| Detection condition |
- U0001:88
- Electric parking brake control module detects the CAN bus communication line (HS-CAN) malfunction 10 times continuously with the ignition switched ON (engine off or on).
- U0100:00
- Electric parking brake control module could not receive the CAN signal from the PCM with the ignition switched ON (engine off or on).
- U0101:00
- Electric parking brake control module could not receive the CAN signal from the TCM with the ignition switched ON (engine off or on).
- U0121:00
- Electric parking brake control module could not receive the CAN signal from the DSC HU/CM with the ignition switched ON (engine off or on).
- U0151:00
- Electric parking brake control module could not receive the CAN signal from the SAS control module with the ignition switched ON (engine off or on).
- U0155:00
- Electric parking brake control module could not receive the CAN signal from the instrument cluster with the ignition switched ON (engine off or on).
|
| Fail-safe |
- U0001:88
- U0100:00
- U0101:00
- U0121:00
- U0151:00
- U0155:00
|
| Possible cause |
- Malfunction in CAN bus communication line
- Malfunction in CAN communication line between PCM and electric parking brake control module
- Malfunction in CAN communication line between TCM and electric parking brake control module
- Malfunction in CAN communication line between DSC HU/CM and electric parking brake control module
- Malfunction in CAN communication line between SAS control module and electric parking brake control module
- Malfunction in CAN communication line between instrument cluster and electric parking brake control module
|
| System wiring diagram |
Not applicable |
- Perform the malfunction diagnosis according to the troubleshooting procedure for the multiplex communication system. (See FOREWORD
.)