LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2017 >> CX-5 Grand Select, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 81 (Drive Axle Shaft) >> Rear Drive Shaft Removal/Installation >> Rear Drive Shaft Installation Note

Rear Drive Shaft Installation Note

WARNING: This page is about a different car, the 2016 Mazda CX-5. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
  • The oil seal could be damaged by the end of the rear drive shaft. When installing the rear drive shaft to the rear differential, be careful not to damage the oil seal. If the oil seal is damaged, replace it with a new one.
  1. Apply rear differential oil to the oil seal lip.
  2. Insert the rear drive shaft to the wheel hub component.
  3. Install the rear drive shaft to the rear differential.
  4. After installation, verify that the rear drive shaft is securely held by the clip by pulling the outer ring on the rear differential side towards the axle side.
scientia non olet · About LEMON Manuals